Motors and fans Pickup motor 1 Remove the ADF back cover. See page 107. 2 Loosen, but do not remove, three screws on the motor mount (callout 1). 1 Figure 127. Pickup motor (1 of 2) 3 Slide the motor toward the right to loosen belt tension. 4 Retighten the three screws on the motor mount. 5 Disconnect one connector (callout 2) and remove two screws (callout 3). 6 Remove the pickup motor. 2 2 3 Figure 128. Pickup motor (2 of 2) 144 Chapter 6 Removal and replacement C8523-90921