Configuring Audio Video Bridging Configuring Audio Video Bridging Command or Action Purpose Example: Device> enable Enter your password if prompted. Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode. Step 3 interface interface-id Example: Device(config)# interface te1/1/1 Defines the interface to be configured as a trunk, and enters interface configuration mode. Step 4 switchport mode trunk Example: Device(config-if)# switchport mode trunk Configures the port as a trunk port. Step 5 exit Example: Device(config-if)# exit Returns to global configuration mode. Step 6 vlan 2 Example: Device(config)# vlan 2 Configures VLAN 2 on the switch.
Note VLAN 2 is the default AVB VLAN. If you need to configure another VLAN as the default AVB VLAN, use the command in Step 7. Step 7 avb vlan vlan-id Example: Device(config)# avb vlan 10 (Optional) Sets the specified VLAN as the default AVB VLAN on the switch. Use this command when you need to set the default AVB VLAN other than VLAN 2. The range for vlan-id varies from 2 to 4094. Step 8 avb Example: Device(config-vlan)# avb Configures AVB on the specified interface. Configuring Audio Video Bridging 8