The following examples provide sample outputs for show commands on VTEP 1 and border VTEP to verify external connectivity for the topology configured above: VTEP 1 The following example shows the output for the show bgp l2vpn evpn route-type command for route type 5 on VTEP 1: VTEP_1# show bgp l2vpn evpn route-type 5 0 10.1.255.103 32 BGP routing table entry for [5][1:1][0][32][10.1.255.103]/17, version 12 Paths: (1 available, best #1, table EVPN-BGP-Table) Flag: 0x100 Not advertised to any peer Refresh Epoch 1 Local 172.16.254.6 (metric 3) (via default) from 172.16.255.1 (172.16.255.1) Origin incomplete, metric 0, localpref 100, valid, internal, best EVPN ESI:
00000000000000000000, Gateway Address: 0.0.0.0, VNI Label 50901, MPLS VPN Label 0 Extended Community: RT:1:1 ENCAP:8 Router MAC:0C75.BD67.EF48 Originator: 172.16.255.103, Cluster list: 172.16.255.1, 172.16.255.6 rx pathid: 0, tx pathid: 0x0 net: 0x7F84B914EF38, path: 0x7F84BAFD0E30, pathext: 0x7F84BB42E698 flags: net: 0x100, path: 0x3, pathext: 0xA1 Updated on May 20 2020 19:31:08 UTC The following example shows the output for the show bgp l2vpn evpn route-type command for route type 2 on VTEP 1: VTEP_1# show bgp l2vpn evpn route-type 2 0 44d3ca286cc1 10.1.101.2 BGP routing table entry for [2][172.16.254.4:101][0][48][44D3CA286CC1][32][10.1.101.2]/24, version 17 Paths:
(1 available, best #1, table evi_101) Advertised to update-groups: 1 Refresh Epoch 1 Local :: (via default) from 0.0.0.0 (172.16.255.4) Origin incomplete, localpref 100, weight 32768, valid, sourced, local, best EVPN ESI: 00000000000000000000, Label1 10101, Label2 50901 Extended Community: RT:1:1 RT:65001:101 ENCAP:8 Router MAC:7C21.0DBD.9548 Local irb vxlan vtep: vrf:green, l3-vni:50901 local router mac:7C21.0DBD.9548 core-irb interface:Vlan901 vtep-ip:172.16.254.4 rx pathid: 0, tx pathid: 0x0 net: 0x7F84B914E858, path: 0x7F84BAFD09F8, pathext: 0x7F84BB42E4B8 flags: net: 0x0, path: 0x4000028000003, pathext:
0x81 Updated on May 20 2020 19:31:30 UTC The following example shows the output for the show ip route vrf command on VTEP 1: VTEP_1# show ip route vrf green Routing Table: green Configuring EVPN VXLAN External Connectivity Example: Enabling Layer 3 External Connectivity with MPLS Layer 3 VPN through iBGP Configuring EVPN VXLAN External Connectivity 27