２ Precautions (1) When building an actual system, check the specifications of the component devices of the system, use within the ratings and specified performance, and take safety measures such as safety circuits to minimize the possibility of an accident. (2) For safe use of the system, get the manuals of the component devices of the system and check the information in each manual, including “Safety Precautions” or “Precautions for Safe Use” before usage. (3) It is the responsibility of the customer to check all the laws, regulations, and standards that the system must comply with. (4) All rights reserved.
No part of this publication may be reproduced, copied and redistributed without the prior written permission of Omron. (5) The information in this guide is current as of December 2019. It is subject to change without notice because of product upgrade. (6) This IAG library has been tested with the system configuration in 3-2 “System Configuration.” However, Omron does not guarantee screen operations after embedding the IAGs. Special information in this document is classified as follows: Precautions for Safe Use It describes precautions on what to do and what no to do to ensure safe usage of the product.
Precautions for Correct Use It shows precautions on what to do and what not to do to ensure proper operation and performance. Additional Information It shows precautions on what to do and what not to do to ensure proper operation and performance. Copyrights and Trademarks ⚫ Sysmac® is the trademark or registered trademark of Omron Corporation in Japan and other countries for Omron factory automation products. ⚫ Screenshots are used in accordance with Microsoft Corporation guidelines. ⚫ Windows and Visual Basic are the registered trademarks of Microsoft Corporation in the USA and other countries. ⚫ EtherCAT® is registered trademark and patented technology licensed by Beckhoff Automation GmbH.
⚫ Company names and product names in this document are the trademarks or registered trademarks of their respective companies. 8