1 Using IAGs 1-1 Registering IAGs and Using IAGs for Projects Unzip the provided file on your computer and save the IAG collection (with the .iag extension). To use the IAGs, you need to register the IAGs in the Toolbox of your Sysmac Studio. After the regis- tration, you can drag and drop them to a page for use, just like other objects. For details on the basic functions of the IAGs, refer to the section related to the IAGs in the NA-series Programmable Terminal Software User's Manual (V118) . Version Information You need the Sysmac Studio version 1.31 or higher to use the NJ/NX/NA-series Backup and Restore IAGs.
Additional Information IAGs serve as a software library, with which you can distribute functions created by combining objects and subroutines provided by the NA-series Programmable Terminal. IAGs are distributed as an IAG collection (with the .iag extension). One IAG collection contains one or more IAGs related to a specific function. 1-1-1 Registering IAGs 1 Start the Sysmac Studio. Open a project that uses IAGs or create a new project. Type of project Select device 1-2 Programmable Terminals NA-series Practices Guide NJ/NX/NA-series Backup and Restore IAG (V127)