Paint treatment PAINT TREATMENT ΞΦ95 series 0 1.5 RESPRAYING THERMOPLASTIC POLYMER PARTS Thermoplastic polymers include the following "elastic" plastics: ASA, ABS and PUR. 1. Remove any preserving agents, if applicable; see "General operations". 2. Clean the area to be resprayed with a solvent. 3. Sand the area to be resprayed with P180 sand paper 3 4. Fine-sand with 3M Scotch Brite ultra fine or an equivalent product. 5. Remove any dust from the sanded section with a Tack-rag cloth. 6. Blow ionised air over the area to be resprayed, or clean the area with an anti- static liquid. 7. Clean the area to be sprayed with a solvent. 8.
Apply an elastic top coat (10-15% elastifier in the base paint) according to the manufacturer's instructions. 9. Leave the top coat to evaporate/dry. Observe the drying time as laid down in the manufacturer's instructions. © 200651 1-7