Руководство по эксплуатации Epson DM-D500 — принтеры и сканеры (EN)

DM-D500 Technical Reference Guide Product Overview Describes features of the product. Setup Describes setup and installation of the product. Application Development Information Describes information required to develop applications. Handling Describes how to handle the product. Hardware Describes the hardware of the product. Character Code Tables Describes the character code tables. M00087600 Rev. A

Стр. 1

CAUTIONS • No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permis- sion of Seiko Epson Corporation. • The contents of this document are subject to change without notice. Please contact us for the latest informa- tion. • While every precaution has taken in the preparation of this document, Seiko Epson Corporation assumes no responsibility for errors or omissions. • Neither is any liability assumed for damages resulting from the use of the information contained herein.

• Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third par- ties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s operating and maintenance instructions.

• Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation. TRADEMARKS EPSON is a registered trademark of Seiko Epson Corporation. Exceed Your Vision and ESC/POS are registered trademarks or trademarks of Seiko Epson Corporation. Microsoft ® and Windows ® are registered trademarks of Microsoft Corporation in the United States and/or other countries.

ESC/POS ® Proprietary Command System Epson took the initiative by introducing ESC/POS, a proprietary POS printer command system including pat- ented commands and enabling versatile POS system construction with high scalability. Compatible with all types of Epson POS printers and displays, this proprietary control system also offers the flexibility to easily make future upgrades. Its popularity is worldwide. © Seiko Epson Corporation 2015. All rights reserved. 2

Стр. 2

Warnings

For Safety Key to Symbols The symbols in this manual are identified by their level of importance, as defined below. Read the following carefully before handling the product. You must follow warnings carefully to avoid serious bodily injury. 3 WARNING Provides information that must be observed to prevent damage to the equipment or loss of data. • Possibility of sustaining physical injuries. • Possibility of causing physical damage. CAUTION • Possibility of causing information loss. Provides information that must be observed to avoid damage to your equipment or a malfunction. Notes have important information and useful tips on the operation of your equipment.

Warnings • Remove your equipment immediately if it produces smoke, a strange odor, or unusual noise. Con- tinued use may lead to fire. Immediately unplug the equipment and contact your dealer or a Seiko Epson service center for advice. WARNING • Never attempt to repair this product yourself. Improper repair work can be dangerous. • Never disassemble or modify this product. Tampering with this product may result in injury or fire. • Do not allow foreign matter to fall into the equipment. Penetration by foreign objects may lead to fire. • Do not connect cables in ways other than those mentioned in this manual. Different connections may cause equipment damage and burning.

• Do not use in locations subject to high humidity or dust levels. Excessive humidity and dust may cause equipment damage or fire.

Стр. 3

About the Modular-type Connector

Cautions • Be sure to set this equipment on a firm, stable, horizontal surface. The product may break or cause injury if it falls. • Do not place heavy objects on top of this product. Never stand or lean on this product. Equipment may fall or collapse, causing breakage and possible injury. • Do not connect multiple extension struts. If the device topples over, there is a risk of damage or injury. • The horizontal rotating angle of the screen unit is limited by a stopper. Do not apply excess force to rotate the screen unit past the limit set by the stopper. Doing so may cause damage.

• Take care when handling the customer display not to drop or knock it because it has a built-in fluores- cent display tube. • Do not use aerosol sprayers containing flammable gas inside or around this product. Doing so may cause fire. • If water or other liquid spills into this equipment, unplug the cable and contact your dealer or Seiko Epson service center for advice.

• Using in the presence of silicon gas (silicon adhesive, silicon oil, silicon powder, etc.) including silox- ane and of malignant gas (nitric acid, hydrosulfuric, ammonia, chlorine, etc.) may cause contact failure at contact points in a mechanical switch and a DC motor, etc., in a short time because of adhesion or oxidization of the insulation film.

CAUTION Restriction of Use When this product is used for applications requiring high reliability/safety, such as transportation devices related to aviation, rail, marine, automotive, etc.; disaster prevention devices; various safety devices, etc.; or functional/precision devices, etc., you should use this product only after giving consideration to including fail- safes and redundancies into your design to maintain safety and total system reliability.

Because this product was not intended for use in applications requiring extremely high reliability/safety, such as aerospace equipment, main communication equipment, nuclear power control equipment, or medical equipment related to direct medical care, etc., please make your own judgment on this product's suitability after a full evaluation. About the Modular-type Connector This product uses a modular-type connector as dedicated connector for the customer display. Never use this connector to connect to LAN or public telephone line. 4

Стр. 4