Chapter 2 Handling Handling This chapter describes basic procedures for handling the product. Connecting to the Printer Connect the USB cable of the customer display to the USB connector on the printer. Supported printers are listed below. See "Supported Printers" on page 52 for more details. TM-H6000VI TM-m30III-H TM-L100 (Device charging model/Bluetooth model) TM-m50 TM-m30 TM-m50II TM-m30II TM-m50II-H TM-m30II-H TM-T70II-DT2 TM-m30II-NT TM-T88VI TM-m30II-S TM-T88VI-DT2 TM-m30II-SL TM-T88VI-iHUB TM-m30III TM-T88VII Make sure to turn the printer off and then connect this product.
The product cannot be connected to the USB-A Device Charging (iPad 2.1A) connector that is mounted on TM-m30II-H or other printers. If you want to extend the USB cable, use the optional USB extension cable (OT-UL30). The optional kit, EXTENSION POLE UNIT FOR DM-D70 (DP-70), includes a USB extension cable. You can mount this product to TM-m30II-S as a rear display. Refer to TM-m30II-S User’s Manual for more details. U https://support.epson.net/publist/bsredirect.php?code=M001306 When connecting to TM-H6000VI, set DIP switch 2-2 on the printer to OFF. 12