Series HMI Connection Manual NOTE 1) PLC IP address must be set first on RSLogix 5000 software and downloaded to PLC; otherwise PLC IP address can not be read. For detailed information about the setting methods, please refer to RSLogix 5000 software user manual. 2) Please do not change the COM port setting. 3) In this driver, PLC station number has no function. V1.00 Revision March, 2010 7 Format Word No. (n) Type Read/Write Range Note Slot No. (s) File No. (f) Bit No.
(b) Output O:n/b O:0/0 – O:255/15 (s = 0, f = 0) O:s.n/b O:0.0/0 – O:255.255/15 (f = 0) Input I:n/b I:0/0 – I:255/15 (s = 0, f = 1) I:s.n/b I:0.0/0 – I:255.255/15 (f = 1) Status S2:n/b S2:0/0 – S2:255/15 (f = 2) Bit B:n/b B:0/0 – B:255/15, (f = 3) Bf:n/b B3:0/0 – B3:255/15, B9:0/0 – B255:255/15 Control size of bit array R:n.LEN/b R:0.LEN/0 – R:255.LEN/15, (f = 6) Rf:n.LEN/b R6:0.LEN/0 – R6:255.LEN/15, R9:0.LEN/0 – R255:255.LEN/15 Control Reserved R:n.POS/b R:0.POS/0 – R:255.POS/15, (f = 6) Rf:n.POS/b R6:0.POS/0 – R6:255.POS/15, R9:0.POS/0 – R255:255.POS/15 Integer N:n/b N:0/0 – N:255/15, (f = 7) Nf:n/b N7:0/0 – N7:255/15, N9:0/0 – N255:255/15 Long Word File Lf:n/b L9:0/0 – L255:255/31