Series HMI Connection Manual Allen Bradley Ethernet IP(Controllogix, Compactlogix) (Support Allen Bradley ControlLogix, CompactLogix series PLC) HMI Factory Setting: Controller IP Address: 192.168.0.1 Controller COM Port: 44818 ( Note 4 ) Controller Station Number: 0 (Slot Number) ( Note 5 ) Control Area / Status Area: None / None Connection Standard Jumper Cable / Network Cable without jumper (Auto-detected by HMI) Definition of PLC Read/Write Address a. Registers b. Contacts NOTE 1) SINT f:n : n must be an even number. 2) BOOL f:n : n must be the multiple of 32.
V1.00 Revision March, 2010 1 Format Type File No.(f) Read/Write Range Data Length Note Word No.(n) SINT Variable SINTf:n SINT0:0 – SINT999:65534 Byte 1 INT Variable INTf:n INT0:0 – INT999:65535 Word DINT Variable DINTf:n DINT0:0 – DINT999:65535 Double Word BOOL Variable BOOLf:n BOOL0:0 – BOOL999:65504 Double Word 2 REAL Variable REALf:n REAL0:0 – REAL999:65535 Double Word Format File No.(f) Type Read/Write Range Note Word No.(n) Bit No.(b) SINT Variable SINTf:n/b SINT0:0/0 – SINT999:65535/7 INT Variable INTf:n/b INT0:0/0 – INT999:65535/15 DINT Variable DINTf:n/b DINT0:0/0 – DINT999:65535/31 BOOL Variable BOOLf:n BOOL0:0 – BOOL999:65535