DPO6000, MPO6000 Series Digital Fluorescent Oscilloscope Product Manual V1.3 Adjust the support feet Connect the power cord as required The specifications of the AC power source that this oscilloscope can input are: 100- 120Vac, 50/60/400Hz; 100-240Vac, 50/60Hz; 50W max. Connect the oscilloscope to an AC power source using the power cord provided in the accessory (shown below). Power jack Connect the power supply Startup check When the oscilloscope is powered on, press the power switch in the lower left corner of the front panel to start the oscilloscope. During startup, the oscilloscope performs a se- ries of self-tests.
During the self-test, the keyboard indicators light up according to a certain sequence of rules. After the self-test ends, the startup screen appears. 9