DPO6000, MPO6000 Series Digital Fluorescent Oscilloscope Product Manual V1.3 CAUTION To avoid damaging the oscilloscope or probe, do not place it in mist, liquid or solvent. Clean According to the requirements of operating conditions, check the oscilloscope and probe frequently. Please clean the outer surface of the instrument according to the fol- lowing steps: Use a lint-free cloth to remove dust from the outside of the oscilloscope and probe. Be careful not to scratch the smooth display filter. Clean the oscilloscope with a soft cloth dampened with water. For more thorough cleaning, use 75% isopropyl alcohol in water.
CAUTION To avoid damaging the surface of the oscilloscope or probe, do not use any corrosive or chemical cleaning agents. Equipment recycling Production of this equipment requires the extraction and use of natural resources. If this product is not disposed of properly, some of the substances contained in the device may be harmful to the environment or human health. To avoid release of harmful sub- stances into the environment and reduce the use of natural resources, it is recom- mended that this product be recycled by appropriate methods to ensure that most ma- terials can be reused correctly.
Introduction to DPO6000 / MPO6000 Series Digital Phosphor Oscilloscope DPO6000 / MPO6000 series oscilloscopes have extremely high memory depth, ultra- wide dynamic range, good display effect, and high waveform capture rate and up to 16 trigger functions, 5 serial decoding functions, which are communication, aerospace, na- tional defense, embedded Instrumentation in many industries and fields such as em- bedded systems, computers, research and education. Main feature: ★ The real-time sampling rate of the analog channel is 1GSa/s, the standard configura- tion is 64Mpts, and the maximum memory depth is 128Mpts (6000EDU series).
★ Digital channel real-time sampling rate 1GSa/s ★ 200MHz, 100MHz and 80MHz analog channel bandwidths are available 5