For example, :TRIGger:SPI:SLOPe POSitive /*Set the clock edge to the rising edge*/ :TRIGger:SPI:SLOPe? /*The query returns POS*/ :TRIGger:SPI:WIDTh For example, :TRIGger:SPI:WIDTh 10 /* 设置数据位宽为 10*/ :TRIGger:SPI:WIDTh? /* 查询返回 10*/ Related commands :TRIGger:SPI:DATA :TRIGger:SPI:DATA For example, :TRIGger:SPI:DATA 5 /*Set the data value to 5*/ :TRIGger:SPI:DATA? /*The query returns 5*/ Related commands :TRIGger:SPI:WIDTh :TRIGger:SPI:TIMeout For example, :TRIGger:SPI:TIMeout 0.001 /*Set the timeout time to 1ms*/ :TRIGger:SPI:TIMeout? /*The query returns 1.000000e-03*/ Related commands :TRIGger:SPI:WHEN 101 / 136 Return format The query returns POS or NEG.
Command format :TRIGger:SPI:WIDTh :TRIGger:SPI:WIDTh? Function description Set or query the data bit width of the data channel under SPI trigger. Parameter Name Type Range Default Integer 4 to 32 8 Return format The query returns an integer. Command format :TRIGger:SPI:DATA :TRIGger:SPI:DATA? Function description Set or query the data value triggered by SPI. Parameter Name Type Range Default Integer 0 to 232-1 82 Description The value range of is related to the current data bit width. The maximum data bit width is 32, so the value range of is 0 to 232-1. Return format The query returns an integer. Command format :TRIGger:SPI:TIMeout :TRIGger:SPI:TIMeout?
_ Function description Set or query the timeout time when the trigger condition is timeout under SPI trigger. The default unit is s. Parameter Name Type Range Default _ Integer 100ns to 1s 1μs Return format The query returns the timeout time in scientific notation.