for example: [:TRACe[ ]]:DATA:VALue volatile, , Symbol Description The following symbols are not sent with the command. 1. Braces {} The contents of the braces are parameter options. Parameter items are usually separated by a vertical bar "|". When using a command, you must select one of the parameters. 2. Vertical bar | Vertical bar is used to separate multiple parameter options. One of the parameters must be selected when using the command. 3. Square brackets [] The content in square brackets is omissible. 4. Triangle brackets The parameters in the triangle brackets must be replaced with a valid value. Parameter Type 1. Bool The parameter value is on, off, 1 or 0. For example:
:MEASure:ADISplay :MEASure:ADISplay? Where: can be set to: {{1|ON}|{0|OFF}}. The query returns 1 or 0. 2. Discrete The Discrete parameter takes the listed options. For example: :ACQuire:TYPE :ACQuire:TYPE? Where: can be set to: NORMal|AVERages|PEAK|HRESolution. The query returns the abbreviated form: NORMal, AVERages, PEAK or HRESolution. 3. Integer Unless otherwise stated, parameters can be any integer (NR1 format) within the valid value range. Note that at this time, please do not set the parameter to decimal format, otherwise an exception will occur. For example: :DISPlay:GBRightness :DISPlay:GBRightness? Where: can be set to an integer between 0 and 100.
The query returns an integer between 0 and 100. 4. Real The parameter can be any real number within the valid value range. This command accepts 12 / 136