For example, :ACQuire:AVERages 64 /*Set the average number to 64*/ :ACQuire:AVERages? /*The query returns 64*/ :ACQuire:MDEPth For example, :ACQuire: MDEPth 32000 /*Set storage depth to 32000pts*/ :ACQuire: MDEPth? /*The query returns 32000*/ ACQuire:TYPE 17 / 136 Description ▷You can send the: ACQuire: TYPE command to set the acquisition method. ▷In the average acquisition mode, the higher the number of averages, the smaller the collected waveform noise and the higher the vertical resolution, but the slower the response of the displayed waveform to the waveform changes. Return format The query returns an integer between 2 and 1024. Command format :ACQuire:MDEPth :ACQuire:MDEPth?
Function description Set or query the storage depth of the oscilloscope (that is, the number of waveform points that can be stored in a triggered acquisition). The default unit is pts (points). Parameter Name Type Range Default Discrete refer to description AUTO Description For analog channels: ▷Single channel open, the range of is {AUTO|32,000|320,000|3,200,000|32,000,000|64,000,000|128,000,000}. ▷When dual channel is on, the range of is {AUTO|16,000|160,000|1,600,000|16,000,000|32,000,000|64,000,000}. ▷When three or four channels are on, the range of is {AUTO|8,000|80,000|800,000|8,000,000|16,000,000|32,000,000}.
Memory depth, the relationship between the sampling rate and waveform length satisfies the following formula: Memory depth = sample rate × wave length When selecting AUTO, the oscilloscope automatically selected memory depth based on the current sampling rate. Return format The query returns the actual number of points (integer) or AUTO. Command format :ACQuire:TYPE :ACQuire:TYPE? Function description Set or query the acquisition method of oscilloscope samples Parameter Name Type Range Default Discrete {NORMal|AVERages|PEAK|HRESolution} NORMal Description ▷NORMal (normal): In this mode, the oscilloscope samples the signal at equal time intervals to reconstruct the waveform.
For most waveforms, using this mode produces the best display results. ▷AVERages: In this mode, the oscilloscope averages waveforms that have been