For example, :CHANnel1:OFFSet 1V /*Set the vertical offset of CH1 to 1V*/ :CHANnel1:OFFSet? /*The query returns 1*/ :CHANnel :RANGe For example, :CHANnel1:RANGe 1V /*Set the vertical range of CH1 to 1V*/ :CHANnel1:RANGe? /*The query returns 1.000e + 00*/ :CHANnel :TCAL For example, :CHANnel1:TCAL 0.00000002 /*Set the delay correction time to 20ns*/ :CHANnel1:TCAL? /*The query returns 2.000000e-08*/ :CHANnel :SCALe 21 / 136 you set an offset outside the legal range, the offset value will be automatically set to the closest legal value. Return format The query returns the vertical displacement value in scientific notation. Command format :CHANnel :RANGe :CHANnel :RANGe?
Function description Sets or queries the vertical displacement of the specified channel. The default unit is V. Parameter Name Type Range Default Discrete {1|2|3|4} —— Real type Related to probe ratio Probe ratio is 1X: 5mV to 100V 10V (probe ratio is 1X) Description This command indirectly modifies the vertical scale of the specified channel (vertical scale = vertical range / 10). Return format The query returns the vertical range value in scientific notation. Command format :CHANnel :TCAL :CHANnel :TCAL? Function description Set or query the delay correction time of the specified channel. It is used to correct the zero offset of the corresponding channel. The default unit is s.
Parameter Name Type Range Default Discrete {1|2|3|4} —— Real type -100ns to 100ns 0.00s Description If the parameter sent is not a configurable value, the nearest value is automatically taken. Return format The query returns the delay correction time value in scientific notation. Command format :CHANnel :SCALe :CHANnel :SCALe? Function description Sets or queries the vertical scale of the specified channel. The default unit is V. Parameter Name Type Range Default