:CURSor:MANual:AY For example, :CURSor:MANual:AY 200 /*Set the vertical position of cursor A to 200*/ :CURSor:MANual:AY? /*The query returns 200*/ :CURSor:MANual:BY For example, :CURSor:MANual:BY 200 /*Set the vertical position of cursor B to 200*/ :CURSor:MANual:BY? /*The query returns 200*/ :CURSor:MANual:AXValue? 26 / 136 Command format :CURSor:MANual:AY :CURSor:MANual:AY? Function description Set or query the vertical position of cursor A when manual cursor measurement. Parameter Name Type Range Default Integer 0 to 400 100 Description ▷The horizontal and vertical positions of the cursor are defined by the pixel coordinates of the screen.
The pixel coordinates of the screen range from (0, 0) to (770,400). Among them, (0, 0) is the upper left corner of the screen, and (770,400) is the lower right corner of the screen. The pixel range in the horizontal direction is 0 to 770, and the pixel range in the vertical direction is 0 to 400. ▷When selecting LA for the source of manual cursor measurement, there is no need to use the Y cursor. Return format The query returns an integer between 0 and 400. Command format :CURSor:MANual:BY :CURSor:MANual:BY? Function description Set or query the vertical position of cursor B when manual cursor measurement is performed.
Parameter Name Type Range Default Integer 0 to 400 300 Description ▷The horizontal and vertical positions of the cursor are defined by the pixel coordinates of the screen. The pixel coordinates of the screen range from (0, 0) to (770,400). Among them, (0, 0) is the upper left corner of the screen, and (770,400) is the lower right corner of the screen. The pixel range in the horizontal direction is 0 to 770, and the pixel range in the vertical direction is 0 to 400. ▷ When selecting LA for the source of manual cursor measurement, there is no need to use the Y cursor. Return format The query returns an integer between 0 and 400. Command format :CURSor:MANual:AXValue?
Function description Query the X value at cursor A during manual cursor measurement. The unit is determined by the currently selected horizontal unit.