Advanced Scanning > Various Scanning Settings for Document Capture Pro (for Windows Only) Automatic Feeding Mode starts. The light on the scanner turns on, and the Automatic Feeding Mode window is displayed on your computer. 5. Adjust the edge guides, and then place the original in the ADF. Scanning starts automatically. 6. After scanning stops, place the next original in the ADF. Repeat this procedure until you have scanned all originals. Note: ❏ If you want to scan originals that are detected as double feeds, for example plastic cards or envelopes, press the (Double Feed Detection Skip) button before placing the original to skip double feed detection.
❏ If you want to scan originals that are likely to jam, for example thin paper, press the (Slow Mode) button before placing the original to slow down the scanning speed. 7. After you have scanned all originals, close Automatic Feeding Mode. Press the button on the scanner or press Finish on the Automatic Feeding Mode window displayed on your computer. Note: You can make timeout settings to finish Automatic Feeding Mode . Select Settings on the Document Source list to open the Document Source Settings window. Set Automatic Feeding Mode Timeout (seconds) on the window. The scanned image is saved to the folder you specified.
Related Information & “Placing Originals” on page 36 Various Scanning Settings for Document Capture Pro (for Windows Only) Document Capture Pro allows you to easily scan and save documents such as official reports and forms, by using the optimum settings to suit your needs. This section explains how to make settings for jobs that use convenient functions such as sorting. 99