Basic Operation The readouts in big font size on the menu are just results of the corresponding measurements. Taking Measurements: For a single waveform (or a waveform divided among multiple waveforms), up to 4 automatic measurements can be displayed at a time. The waveform channel must stay in an ‘ON’ (displayed) state to facilitate the measurement. The automatic measurement can not be performed on reference or math waveforms, or in XY or Scan mode. 5.5.3 ACQUIRE Press “UTILITY” key to enter the Utility menu and turn to the page 4/5 and then Push the ACQUIRE key to set the acquisition parameter.
DSO1000B(V) Series HandHeld Oscilloscope User Manual 33 30 LRR The time between the first rising edge of source 1 and the last rising edge of source 2. 31 FFR The time between the first falling edge of source 1 and the first rising edge of source 2. 32 FRF The time between the first rising edge of source 1 and the first falling edge of source 2. Off Do not take any measurement. Options Settings Comments Type Real Time Equ-Time Acquire waveforms by real-time digital technique. Rebuild waveforms by equivalent sample technique. Mode (Real Time) Normal Peak Detect Average Acquire and accurately display most waveforms. Detect glitches and eliminate the possibility of aliasing.
Reduce random or uncorrelated noise in signal display. The number of averages is selectable. Averages (Real Time) 4 8 16 32 Select the number of averages.