Basic Operation 5.5.5 CURSOR The Cursor Menu. Moving Cursors: Press the key F3 to select a cursor and move it with the Arrow key. Cursors can be moved only when the Cursor Menu is displayed. Time Cursor Voltage Cursor 5.5.6 DISPLAY The waveform display is affected by settings of the oscilloscope. A waveform can be measured once it is captured. The different styles to display a waveform on the screen give significant information about it. There are two modes to display waveforms Single-window and Dual-window. Refer to Horizontal Controls for more information. The DISPLAY menu.
DSO1000B(V) Series HandHeld Oscilloscope User Manual 36 Options Settings Comments Type Off Voltage Time Select a measurement cursor and display it. Voltage measures amplitude while Time measures time and frequency. Source CH1 CH2 MATH REFA REFB Select a waveform to take the cursor measurement. Use the readouts to show the measurement. Select Cursor S E S indicates Cursor 1. E indicates Cursor 2. A selected cursor is highlighted, which can be moved freely. Both cursors can be selected and moved at the same time. The box behind the cursor displays the location of the cursor. Delta Display the difference (delta) between the cursors. Display the measurement in the box under this option.