Getting Started Guide Chapter 3 Getting Started Guide 3.1 Installation To keep proper ventilation of the oscilloscope in operation, leave a space of more than 5cm away from the top and the two sides of the product. 3.2 Functional Check Follow the steps below to perform a quick functional check to your oscilloscope. 3.2.1 Power on the oscilloscope Press the ON/OFF button. The default Probe option attenuation setting is 10X. The default probe parameter 3.2.2 Connect the oscilloscope Set the switch on the probe to 1X and connect the probe to Channel 1 on the oscilloscope.
First, align the slot in the probe connector with the protuberance on the CH1 BNC and push to connect; then, turn to right to lock the probe in place; after that, connect the probe tip and reference lead to the PROBE COMP connectors. The Probe COMP: ~2V@1KHz. PROBE COMP DSO1000B(V )Series HandHeld Oscilloscope User Manual 4 CH1: to connect with the probe