User Manual ID: The ID value of the current frame; Data: The data of the current frame; Checksum. 2.8.3. CAN Decode CAN decode settings: Source: CH1; Baund Rate: 1000000; Idle Level: Low; When: Start Bit. The trigger result is shown below: CAN Decode interpretation: 1. The decode data is displayed in hexadecimal; 2. The decoded data is at the bottom of the waveform interface. The color of “frame ID” is displayed purple, the “Data” is blue, the “CRC” is purple; 3. When there are "?" or "adjust the time base", you need to adjust the time base to see the decoding results. CAN text interface is shown as below: 36 / 67