User Manual ID: The ID value of the current frame, displayed as hexadecimal; Type: Frame type. “SFF”- Standard data frame, “SRF”- Standard remote frame, “EFF”- Extended data frame, “ERF”- Extended remote frame; DLE: Data bytes of current frame; Data: The data of current frame; CRC ： The CRC check code of current frame. 2.8.4. SPI Decode SPI decode settings ： SCL: CH2; SDA: CH1; Slope: Rising; Data Width: 8; Overtime: 8.37us. The trigger result is shown below: SPI Decode interpretation: 1. The decode data is displayed in hexadecimal; 2. The decoded data is at the bottom of the waveform interface. The color of “Data” is displayed purple; 3.
When there are "?" or "adjust the time base", you need to adjust the time base to see the decoding results. SPI text interface is shown as below: 37 / 67