DeviceNet Network Scanner DVPDNET-SL 3> Confirm all the settings and click on “OK”. Next, download the configuration to DVPDNET-SL. If DVP-SV is in RUN mode while you are downloading the configuration, a “Warning” dialog box will appear. 4> Click on “OK” to continue the download. Make sure DVP-SV is in RUN mode. „ The mapping relation between DVPDNET-SL and slave device is shown as below after DVP28SV → DVPDNET-SL → slave device configuration of the DeviceNet network following the above steps is completed.
DVP28SV ← DVPDNET-SL ←slave device DVP-PLC Operation Manual 37 DVP28SV DVPDNET-SL RTU-DNET & VFD-L D6287 Control word of VFD-L （2000H） D6288 Control frequency of VFD-L (2001H） DVP28SV DVPDNET-SL RTU-DNET & VFD-L D6037 Output frequency of VFD-L （2103H）