DeviceNet Network Scanner DVPDNET-SL 1.3 Specifications „ PLC that DVPDNET-SL supports „ DeviceNet Interface „ DeviceNet Communication „ Environment DVP-PLC Operation Manual 2 Item Specification PLC Model DVPDNET-SL supports PLC MPU which can be extendable in its left side g. DVP-SV, DVP-EH2 L, DVP-SX2, DVP-SA2, DVP10MC11T etc.） _ Item Specification Transmission method CAN Electrical isolation 500V DC Interface Removable connector (5.08mm) Transmission cable TAP-CB01 cable and TAP-CB02 cable are recommended. (The shielded wire must be grounded and the cable should be away from power line) Voltage DeviceNet network provides direct current:
11~25V, 28mA（typical value）, 125mA impulse current（24 VDC） Item Specification Message type Explicit connection, IO polled connection, bit-strobe connection, COS/CC connection Baud rate Standard mode: 125 kbps; 250 kbps; 500 kbps Extended mode: 10 kbps; 20 kbps; 50 kbps; 125 kbps; 250 kbps; 500 kbps; 800kbps; 1M kbps Item Specification Noise immunity ESD (IEC 61131-2, IEC 61000-4-2): 8KV Air Discharge EFT (IEC 61131-2, IEC 61000-4-4): Power Line: 2KV, Digital I/O: 1KV Analog & Communication I/O: 1KV Damped-Oscillatory Wave: Power Line: 1KV, Digital I/O: 1KV RS (IEC 61131-2, IEC 61000-4-3):
26MHz ~ 1GHz, 10V/m Operation 0ºC ~ 55ºC (temperature); 50 ~ 95% (humidity); pollution degree 2 Storage -25ºC ~ 70ºC (temperature); 5 ~ 95% (humidity) Vibration/shock resistance Standard: IEC 61131-2、IEC 68-2-6 (TEST Fc)/IEC 61131-2 & IEC 68-2-27 (TEST Ea) Certificates IEC 61131-2, UL508