DVS-108 Series Managed Industrial Ethernet Switches User Manual Example 1: There is a DHCP server in your environment, and the Delta switch can get an IP address from the DHCP server. If you don’t want to check the IP address from the DHCP server, then you can use USB console cable to login to Delta switch. Use “show network” command can display the IP address information of the Delta switch. Example 2: Use CLI commands to set a static IP address and subnet mask.
(DVS-108W02-2SFP) > enable (DVS-108W02-2SFP) # configure terminal (DVS-108W02-2SFP) (config)# interface vlanmgmt (DVS-108W02-2SFP) (config-if)# no ip address (DVS-108W02-2SFP) (config-if)# ip address 10.10.10.1 255.255.255.0 (DVS-108W02-2SFP) (config-if)# exit (DVS-108W02-2SFP) (config)# exit (DVS-108W02-2SFP) # save Building configuration ... [OK] (DVS-108W02-2SFP) # Note: Before you use USB console configuration, please make sure you have installed a USB driver. You can find the driver in the CD. 2-4