Chapter 3 Featured Functions HTTP Upload HTTP Upload If you select Archive in File Type drop down list, the image name item will show up. After selecting File Type, click Apply and specify a path to start uploading. 3.1.8 Management Access Delta switch supports not only one way to access web management interface. You can configure HTTP or secure HTTP (HTTPS), and you also can configure Secure Shell (SSH), Telnet and console port access. 3-27 Description Factory Default File Type Specify the type of file in the drop down list that you want to upload: Archive: When you select Archive, the Image Name drop-down list is displayed. Startup Configuration:
When the switch boots up, the Startup Configuration will be applied. Backup Configuration: It’s used to backup the Startup Configuration file. Log: This file records the log information of the switch. Script File: This file is used to configure the switch by CLI script. Notice: Backup Configuration file is for user to back up Startup Configuration file, but it must use CLI to backup. You can use the command: “copy nvram:startup-config nvram:backup-config” to backup Startup Configuration file by Hyper Terminal Software or Telnet. None Image Name Only when you select Archive from the File Type drop-down list is the Image Name drop-down list displayed. Specify the image: image1:
The uploaded image firmware as image1. image2: The uploaded image firmware as image2. image1