Chapter 3 Featured Functions HTTPS Configuration After you enable the HTTPS connection, you can type https://Delta switch’s IP address into the web browser to establish an HTTPS connection. Certificate Management You can use the function in this page to generate a self-signed certificate for an HTTPS connection. Certificate Management 3-29 Description Factory Default HTTPS Admin Mode Specify whether the web management interface can be accessed from a web browser over an HTTPS connection. Disable: The web management interface can’t be accessed over an HTTPS connection. You need to use a Telnet, SSH, or console connection to access the switch. Enable:
The web management interface can be accessed over an HTTPS connection. Notice: If you want to enable HTTPS Admin mode, you need to Generate Key, then apply for Generate Certificate, please refer to Certificate Management. Disable HTTPS Port The HTTP port number. The number must be in the range of 1 to 65535. 443 HTTPS Session Timeout (minutes) The HTTPS session time-out period in minutes. When there is no activity and the time-out period is reached, the HTTP session will be closed. The time period must be in the range of 1 to 60 minutes. 30 Description Factory Default None No certificate is to be generated. None Generate Key (RSA-1024 bits) Generate a 1024-bit RSA key.
After the key has been generated, the page reverts to its default setting and the None item will be selected. None