Software Notes on the copy commands Copy commands are used to parallely load the contents of 8 or 16 bit operands into the accu or write the contents of the accu into 8 or 16 bit operands. Practical applications: Ш reading binary or BDC values via inputs Ш controlling numerical displays (e.g. 7-segment display) The time it takes to process copy commands depends on the last number of the bit operand’s channel number. The channel number is indicated after the separating point: I00.00 channel number Processing time is shorter if the channel number ends with 0 or 8. Example 1 C1T8 I00.00 => processing time: 3 µs Example 2 C1T8 I00.13 => processing time: 350 µs 61