Fig. 2. Automatic setup: end of procedure In case you have problems with the automatic setup procedure, you should try installing SidekickPC in a manual way. Please refer to the Appendix for information concerning the manual setup. 1.3.1 Overriding the default installation folder If you want to install SidekickPC in an automatic way but not in the default folder ( C:\Electrolux\SidekickPC) , you can open the AutoInstall.cmd file with any text editor (such as, for example, Notepad) and change the following line: SET SK_DIR=C:\Electrolux\SidekickPC You should assign to the SK_DIR environment variable the full path of the target directory.
For example, if you want to install the software in the D:\ driver instead of the C:\ one you can change the line in the following way: © 2024 Electrolux Italia S.p.A., All rights reserved 10 File: SidekickPC.UserManual.EN.docx - Date: 15/04/2024 Classified as Internal