■ Precautions on Installation You can install the projector or mount it to the ceiling at any horizontal or vertical angle. There are no restrictions on the installation angle, whether it is installed vertically or horizontally. Note the following precautions when installing the projector. Warning • Do not use adhesives on the ceiling mount fixing points to prevent the screws from loosening, or use lubricants, oils, or similar substances on the projector; the projector case may crack causing it to fall from its ceiling mount. This could cause serious injury to anyone under the ceiling mount and could damage the projector.
• Do not install the projector in a location subject to high levels of dust or humidity, or in a location subject to smoke or steam. Otherwise, it could cause a fire or electric shock to occur. The projector's case could also deteriorate and be damaged causing the projector to fall from the mount.
Examples of environments that could cause the projector to fall due to case deterioration • Locations subject to excessive smoke or airborne oil particles, such as factories or kitchens • Locations containing volatile solvents or chemicals, such as factories or laboratories • Locations where the projector could be subjected to detergents or chemicals, such as factories or kitchens • Locations in which aroma oils are often used, such as relaxation rooms • Near devices that produce excessive smoke, airborne oil particles, or foam at events Caution Protect your hands with gloves or other safety items when installing the projector.
20 Caution • Use M6 screws (up to a depth of 14 mm) to fix the projector's ceiling mount fixing points and the mounting hardware at four points. • Do not stack projectors directly on top of each other. Cauti