■ Projector Parts - Interface 9 No. Name Notes A Audio Out port (Stereo mini pin jack) Outputs audio from the current input source to an external speaker. B Cable holder Pass a commercially available cable tie through here to secure cables. C RS-232C port (Mini D-Sub 9-pin, male) Use to connect an RS-232C cable to control the projector from a computer. D Service port (USB connector Type B) This port is used for batch settings and firmware update. E USB-A port (USB connector Type A) Use to connect a USB memory device for projecting movies or images in Content Playback mode. This port is used for batch settings and firmware update.
Provides a connection for a streaming media player to power it. Can be powered at 5 V/2 A or 5 V/ 900 mA. F LAN port (RJ-45) Use a 100Base-TX or 10Base-T network cable. To ensure proper data transmission, use a Category 5 shielded cable or better. G HDMI2 port (HDMI) Inputs video signals from HDMI compatible video equipment and computers. This port is compatible with HDCP2.3. (Audio is only supported by PCM) H HDMI1 port (HDMI) Inputs video signals from HDMI compatible video equipment and computers. This port is compatible with HDCP2.3. (Audio is only supported by PCM)