Epson L-6034VW Maintenance Guide Before Inspections Switching the Inspection Mode and the Carriage Unit Position You need to change the inspection mode depending on the part being cleaned. If the Periodic Maintenance screen is displayed on the touch panel during startup inspection or daily maintenance, press Switch Mode and then continue. The mode switches in the order of inspection operations. When inspecting or cleaning, except for startup inspection and daily maintenance, change the inspection mode from the Periodic Maintenance screen on the Maintenance menu.
The following shows the position of the carriage unit for each inspection mode, and which covers to open when inspecting and cleaning. 20 Inspection Mode Name Carriage Unit (a) Position (b: drum) Open Covers Feed section Center (upper wipers/cap unit) Top front cover Wipers/Caps Front (on the drum) Top, left and right rear covers Carriage unit Head nozzle surface Rear Top, left and right rear covers