3-4 DIP Switches n Locating DIP switches On the bottom of your printer are DIP switches that allow the printer to be set or perform a number of different functions. . The switches are numbered SW-1 to SW-10 (TM-U300A/U300B) or SW-1 to SW-8 (TM-U300PA/U300PB), from left to right as shown in figure below. . The lists on the following page describe each switch’s function. I Setting the DIP switches Follow these steps when changing DIP switch settings. Њ Turn the printer power switch off. Ќ Flip the DIP switches using tweezers or other narrow-ended tool. Switches are on when up and off when down. Ћ The new setting takes effect when you turn on the printer. NOTES:
* Always change DIP-switch settings when printer is turned off. . Changes made with the power on have no effect until you turn the printer off and then on again. 19