[Condition] * Character font: 7 X 9 font (with descenders) * Printing pattern: ASCII 96-character rolling pattern continuous printing - Temperature: 25°C 4. Roll paper supply device Supply method: Roll paper shaft-support loading Near-end detector: - Detection method: Micro switch - Roll paper core inside diameter: Ш 10.5 to 12.5 mm - Near-end adjustment: Adjustable slider (Refer to 3-3, Adjusting the Paper Near-End De- tector ) 5. Roll paper take-up device The TM-U300A and TM-U300PA are equipped with a take-up device. The paper is auto- matically take-up by the paper feed motor. 6. Auto-cutter Both the TM-U300A/U300B and TM-U300PA/U300PB are equipped with the auto-cutter.
Full-cut/partial-cut can be executed by commands. 7. Paper Paper feed method: Friction feed Paper feed pitch: Default 1/6 inch Can be set in 1/144 inch units by software command. Paper feed speed: Approx. 4.17 IPS (25 LPS) (continuous feeding) (IPS: Inches Per Second) (LPS: Lines Per Second) Paper size: * Roll paper Paper width: 76 mm ± 0.5 mm 25