SPC Network Guide Using Product via Network Using Product via Network From Network Devices This section describes how to operate your product from network devices running Windows, Mac OS X, iOS, and Android. The following outlines the recommended network settings for each device. ❏ Windows: Using the software disc or installer from the Epson Web site. ❏ Mac OS X: Using EpsonNet Printer Setup from the Epson Web site. ❏ iOS and Android: Using the product’s control panel. See the following sections for more details on each operating system. Windows Setting up using the product’s software disc To use your product from a Windows computer, set up using the product’s software disc.
You can also use the software disc if you want to use the product from a second computer or change the product from a USB connection to a network connection. If your computer does not have a CD/DVD drive, you can download the installer from your regional Epson Web site. Note: ❏ Before beginning setup for a computer, check that your network devices such as the router, wireless adapter, or hub are working properly and remove the memory card from the product. ❏ If the security alert screen for your OS or the application appears, click Unblock or Allow to create a Firewall exception. Do not click Keep Blocking , Block , or similar command on commercially available security software screen.
Depending on the commercially available security software used, the above procedure may not establish a connection. In this case, temporarily exit the security software and then use the product’s software. 7