Network Guide Connecting the Printer to a Smart Device Note: See the documentation provided with your smart device for the operating instructions. 3. Check the message on the printer's control panel, and then select whether or not to connect to the smart device. ❏ To connect Select Approve . ❏ If you do not want to connect Select Reject . If you received a connection request from an unknown device, select Reject . 4. Select whether or not to register the device information to the printer. ❏ To register Select Yes . When you register the device after selecting Approve , the device connects automatically without asking you the next time it connects.
When you register the device after selecting Reject , the device is rejected without asking you the next time you try to connect. ❏ To reject Select No . When a connection request is sent from a device to the printer, the connection permission screen is displayed on the printer. Follow step 3 and 4 every time the screen is displayed. Note: ❏ If you frequently receive a connection request from an unknown device, we recommend registering this device as a rejected device. ❏ You can delete the registered device information from Delete Registered Device in Wi-Fi Setup > Wi-Fi Direct Setup if you accidentally approve an unwanted device, or reject the device you want to connect.
All information for rejected devices and approved devices is deleted. You can check the connection between the printer and the smart device using Epson iPrint. Related Information & “Connecting the Printer and Smart Device by Wi-Fi Direct Mode (for Android Only)” on page 16 & “Checking the Connection Between the Printer and the Smart Device” on page 18 & “Checking the Printer's Network Connection Status” on page 53 Connecting the Printer and Smart Device by Wi-Fi Direct Mode (for Android Only) Connect the smart device to the printer in Wi-Fi Direct mode. The smart device needs to support Wi-Fi Direct to connect.
See the documentation provided with your smart device for the operating instructions. 16