Setting up the RFID System 5.3. Set up the RFID System. Parameter Setting 5.3.1. Set the parameters of the RFID System. Additional Information For details on the RFID System setup and operation refer to the RFID V680S Series User’s Manual (Cat. No. Z353) . 9 1 Connect the RFID System over Ethernet to the controls system and PC. To configure the RFID System, use a web browser, and then enter the IP address of the RFID System. (In this example, the default IP address is used). Any changes to the RFID System can be made using the web browser. For detailed configuration, please refer to RFID System User Manual.