Checking Data that are Sent and Received 5.7.2. Confirm that the correct data are sent and received. 18 1 To check the data, go to the Controller Tags menu and select the Monitor Tags tab. 2 Expand out Tag names by clicking the + symbol next to each tag name. In the first byte of the created Input Tag (V680S: I Data), there is a value of 1. This means that the RFID System is READY. For detailed information on I/O Space, see RFID System V680S Series User’s Manual, Section 5. Host Communications Specifications. 3 To test the output of the RFID System, send a read command to the device. Set the CmdCode to 1 (V680S: O.Data[2]) then enter “1” in the first bit of the Output tag V680S:
O.Data[0] to execute the command.