System Software Switches To enable a system switch, type ENABLE followed by a space and the switch name. For example: ENABLE BELT To disable a switch, use the DISABLE Monitor command. For example: DISABLE BELT eV+Operating System User's Guide, v2.x, 18320-000 Rev A Page 59 Switch Use Default POWER Tracks the status of Robot Power; this switch is automatically enabled whenever Robot Power is turned on. This switch can also be used to turn Robot Power on or off— enabling the switch turns on Robot Power, and disabling the switch turns off Robot Power. The ACE system toolbar provides a Power ( ) icon that can be used in place of this switch. OFF