Safety Precautions 15 When maintenance work is completed, immediately return the protective equipment to its original location. Make sure that no tools or parts used in maintenance work, or other foreign materials are left on the operating parts of the machine or inside the machine. During maintenance, do not use sharpening stones, abrasive/corrosive materials, or solvents (excluding glue and ink film remover). Doing so may erase numbers, codes or characters indicated on the machine. Do not expose the electrical and electronic devices, and motors to liquid. Do not touch the micro switches on the alarm or on the front/rear protection cover.
Use the products properly according to the "Safety Data Sheet" for each product.