4.2 Monitoring the inverter 4.2.1 Monitoring of output current or output voltage • Press in the monitor mode to switch the display among three monitoring screens (output frequency, output current, and output voltage are initially set in the first, second, and third screens, respectively). 1. Press during inverter operation to monitor the output frequency. [Hz] indicator turns ON. 2. Press to monitor the output current. This operation is valid during running or stopping under any operation mode. [A] indicator turns ON. 3. Press to monitor the output voltage. • Other item, such as output power or set frequency, can also be monitored.
Use Pr.774 Operation panel monitor selection 1 to Pr.776 Operation panel monitor selection 3 to change the monitor item. (Refer to page 124 .) 70 4. BASIC OPERATION 4.2 Monitoring the inverter NOTE Operating procedure NOTE