Tray 2 and 3 Pickup, Feed, and Separation Rollers Figure 6-56 Tray 2 and 3, Pickup, Feed, and Separation Rollers There are three rollers for each tray: the Pickup Roller, the Feed Roller, and the Separation Roller. The Feed and Separation Rollers are interchangeable with each other and between trays. The Pickup Rollers are interchangeable between trays. G Tray 2 Pickup Roller: figure 6-56, callout 1 G Tray 2 Feed Roller: figure 6-56, callout 2 G Tray 2 Separation Roller: figure 6-56, callout 3 G Tray 3 Pickup Roller: figure 6-56, callout 4 G Tray 3 Feed Roller: figure 6-56, callout 5 G Tray 3 Separation Roller:
figure 6-56, callout 6 Note The Feed and Separation rollers have protruding tabs, and the pickup rollers have recessed retaining tabs. Be careful not to lose the plastic torque limiters located behind the Separation Rollers (figure 6-56, callout 7). 1 Remove trays. From inside the tray cavity, remove the rollers by pinching the retainer tabs together and sliding the roller off the shaft. 222 Chapter 6 Removal and Replacement C4085-91087