5. Loading the appliance door 7. Fastening the adjusting rib to the furniture door When attaching the furniture doors it is recommended to load the storage sections in the door with weights in order to ensure that the when adjusting crack dimensions turn out to be as precise as possible. 1. Measure distance A between the adjusting rail and the furniture parts above. Loading recommendations: Appliance width Loading of the appliance door 18“ (45.1 cm) 22 lbs (10 kg) 24“ (60.3 cm) 33 lbs (15 kg) 30“ (75.6 cm) 44 lbs (20 kg) 2. Loosen the two nuts (a) and remove the adjusting rib (b). 3. Mark this value A on the rear side of the furniture door. 6.
Removing positioning aids Unscrew the positioning aids from the appliance door. 4. Determine the middle of the door and label it. 5. Rest the adjusting rib on the furniture door and align to the markings. Mark the drill holes. Note: The positioning aids will still be needed in the course of mounting. 6. Pre-drill the holes. 7. Tightly screw the adjusting rib. The minimum number of screws required for this depends on the width of the furniture door. 21