Notes: 5. On both lengths of the furniture door, draw a parallel with the help of the positioning aid. One screw should be screwed in under the threaded rod in each case. The adjusting rib has a various holes for different furniture door design variations. Always carry out screwing jobs on the most stable part of the furniture door. 8. Fastening the fixing rib to the furniture door Note: The fixing ribs are pre-assembled for stainless steel doors. In this case continue with the next installation step (“C / 9. Mounting the furniture door”). 6. Lengthen the markings to the parallels using an angle of contact. 1. Hang the furniture door on the threaded rod (a). 2.
Adjust the furniture door using the threaded rod (Torx screwdriver). Re-examine the dimensions of the crack continuously. To do this, use the assembly gauge (b). 7. Apply the fixing ribs (b) and mark out the holes. 8. Pre-drill the holes. 9. Screw on the fixing ribs (b). 3. Transfer the position of the fastening screws on the outer edge of the appliance door to the furniture door and mark. 10. Hang the furniture door on the threaded rods. 4. Remove furniture door. 22