2 Insert the memory card 2 . There is no difference between the two card slots on the chartplotter. Any compatible card can be inserted into any open card slot, and it will be read by the chartplotter. 3 Press the card in until it clicks. 4 Clean and dry the weather cap. NOTICE To prevent corrosion, be sure the memory card and weather cap are thoroughly dry before closing the cap. 5 Press the weather cap firmly shut. Inserting a Memory Card (GPSMAP ® 8x17/8x22/8x24/87xx) NOTE: The memory card reader is not included with the chartplotter. It is sold as a separate accessory.
You can connect a USB memory card reader to the chartplotter, or you can connect the chartplotter to a Garmin BlueNet network or Garmin ® Marine Network with another chartplotter model that has a built-in memory card slot. As of software version 34.00, the external USB card reader supports up to a 1 TB SD ® memory card, formatted to exFAT with speed class 10 or higher. 1 Open the door 1 on the memory card reader. 2 Insert the memory card 2 with the label facing away from the door. 3 Press the card in until it clicks. 4 Clean and dry the gasket and door. NOTICE To prevent corrosion, be sure the memory card, gasket, and door are thoroughly dry before closing the door.
Introduction GPSMAP® 8400/8600/8700 Series Owner's Manual 19