Using the GPS 72H Navigating a Saved Track TracBack ® navigation uses Track points in a saved track to automatically create a route. Creating Routes A route is a sequence of waypoints that lead you to your destination. A route must have at least two waypoints and can have as many as 50. The GPS 72H can store up to 50 routes. Create or modify a route using the Routes page, and add waypoints to a route. You can also create routes using MapSource ® mapping. To use the TracBack feature: 1. Select a saved track from the 2. Select TracBack . Tracks page. 3. Select Original or Reverse . On the Active Track page, TracBack is listed as the name of the track. To create a waypoint on a saved track: 1.
Select a saved track from the To create a route: 1. Press MENU twice > select 2. Select New . Routes . 2. Select Map . Tracks page. 3. Press MENU to add a waypoint 3. Use the rocker to position the map from the map or from your saved waypoints. pointer to a track point that you want to mark as a waypoint. 4. Select OK add it to the route. 5. Repeat steps 2 through 4 to add 4. Press ENTER . additional waypoints to the route. 6. Press MENU > select Start Navigation . GPS 72H Owner’s Manual 11