Loading media to be printed Loading the paper input tray You can load up to 125 sheets of 20 lb (75 g/m 2 ) media into the paper input tray or feed one sheet at a time into the single-sheet input tray. Note Insert all media vertically (portrait orientation) into the paper input tray or single-sheet input tray. If you want to print horizontally (landscape orientation), make this selection through your software. Do not print on paper smaller than 3 by 5 inches (76.2 by 127 mm). 1 To load the paper input tray The product prints, copies, and prints received faxes using media from the paper input tray (or the single-sheet input tray).
1 Adjust the guides on the paper input tray to fit the size of media you are page 50 3 Readjust the guides to center the stack. 48 Chapter 2 - Installation and operation EN 2 loading. 2 Insert up to 125 sheets of paper into the paper input tray. Be careful not to overfill the bin. Note When adding media to an existing stack 3 the existing media and realign it with the new media before loading to reduce multiple feeds or jams. Note If you have loaded special media, make sure to choose the lower paper output path. See “To select the output path” on