Covers DIMMs 1 Turn the HP LaserJet 3200 product so that you face the back of the product. 2 Lift open the door at the back of the product. 3 Push the anchors on each side away from the DIMMs. Figure 17. DIMMs removal 4 If there is a DIMM in slot 1, lift it straight up to remove it, and then place it on an ESD mat. 5 Repeat step 4 for the DIMM in slot 2 (memory DIMM) and slot 3 (ROM DIMM). Note When reinstalling DIMMs, they must be reinstalled to the slots from which they were removed. 6 After you remove the DIMMs, press the anchors back to their closed position. If the anchors remain in the open position, they can interfere with smooth removal of the back cover. EN Covers 89