Registration assembly 2 1 Figure 71. Removing the registration assembly 1 To remove the registration assembly: a Remove the rear right side cover (page 138). b Remove the control panel (page 139). c Remove the top cover (page 141). d Remove the left side cover (page 143). e Remove the front right side cover (page 144). f Remove tray 1 (page 146). g Remove the tray 1 pickup assembly (page 161). h Lift aside the right side toner cartridge guide (page 164). It is not necessary to unplug the connectors. 2 Remove the three self-tapping screws (callout 1) shown.
(Lift the green handle on the right end of the registration assembly to get to the screw on the left rear side.) EN Chapter 6 Removing and replacing parts 165